Assembly instructions
GB
29
Installation
Mount the body of the hood at the required height in the centre
above the hob. Use the holder, screws and dowels supplied.
Insert a locking screw into the dowel. The hole for the locking
screw can be accessed from the inside of the hood. To access
the hole, open the metal screen and remove the grease filter. It is
located in the middle above the cross section on the back.
Use the M5x20 screws supplied to adjust the body of the hood
into a horizontal position.
Install the mounting bracket (1) for the top part of the chimney
underneath the ceiling with screws and dowels.
Install the mounting bracket (2) for the bottom part of the chimney
with screws and dowels.
Make the connection for extraction air (see the previous section).
Switch the safety fuse in the fuse box off and put in the mains
plug (if present) or make an electrical connection.
2
1
Dowel 6 mm
Dowel 6 mm
Dowel 8 mm
Dowel 8 mm
Locking screw
2
1
