Kuppersbusch EMWK 1060.0, Service Manual

Page: 15 / 26

Service Manual EMWK 1060.0 15
For internal use only
At the end of the cooking time an acoustic signal is emitted (3 times) and “ ” appears in the
display. Open the door and take out the food (the time appears).
If the appliance is hot, the word “
” appears.
Notes:
• You can check the set cooking process at any time by opening the door. As a result, the discharge
of the microwaves and operation of the oven are interrupted and they start working again when
you close the door and press the button “Start cooking process and rapid heating” again.
• If the cooking process is to be interrupted for any reason without the door being opened, simply
press the button “Interruption of the cooking process and cancellation of the entries”.
• To end the cooking process, proceed as follows:
• If the appliance door is open, press the button “Interruption of the cooking process and
cancellation of the entries” once.
• If the appliance door is closed and the cooking process is still under way, press the button
“Interruption of the cooking process and cancellation of the entries” twice. The time is shown
again in the display.
• This model is equipped with an automatic cooling cycle which comes on when the appliance is
very hot (e.g. at the end of prolonged cooking processes). During this cycle the word “
”
appears in the display “Time and modes”. The fan wheels and the oven lighting are on and switch
off automatically.
After the end of every cooking process the oven lamp and the cooling remain on until the door
is opened.
5.5 Automatic, consecutive defrosting and cooking processes
In order to program automatic consecutive defrosting and cooking processes, proceed as follows:
Enter the mode “ Automatic defrosting ” by
pressing the mode selection button twice. The
relevant display for “Automatic defrosting”
appears.
Enter the defrosting period (in minutes) with the
knob.