background image

18

Service Manual EMWK 1060.0

For internal use only

6.

Cleaning

Prior to all maintenance or cleaning work always pull out the mains plug
and wait until the appliance has cooled down.

The cavity is made of stainless steel and therefore cleaning is extremely easy.
Always keep the cover panel of the microwave outlet opening free of oil and
grease splashes.

Never use scouring agents, metal wool or sharp metal objects  for cleaning the
cavity. Moreover, make sure that no water or liquid cleaning agent enters the
waste air and vapour extractor slits on the top of the appliance. 
No alcohol, scouring agents or ammonia-containing cleaning agents are to be
used for cleaning the inside and outside of the door.

To ensure perfect closing, always keep the inside of the door clean and make
sure that dirt and food residues are not jammed between the door and the
appliance front.

Regularly clean the fresh air openings on the rear of the appliance and the
surface under the turntable so that they do not become clogged with dust and
dirt over the course of time. Please contact the 

Customer service 

to check

the fresh air openings on the rear of the appliance.

The turntable and the corresponding holder should also be removed for
cleaning and the bottom of the microwave oven cleaned from time to time.

Clean the turntable and the holder with normal washing-up liquid (they are also
dishwasher-safe).

Do not immerse the turntable after prolonged heating in cold water, it
would break owing to the severe temperature shock.

The motor of the turntable is sealed. However, make sure when cleaning the
appliance bottom that no water penetrates under the turntable pin (D) of the
turntable.

To facilitate the cleaning of the oven cavity, the grill heating element can be
flapped down after the ceramic hook has been  unscrewed.

Important: After cleaning, correctly position the grill heating element
again and hook it on. The combination microwave oven must not be
operated with the grill heating element flapped down.

Summary of Contents for EMWK 1060.0



























Reviews: