12
Service Manual EMWK 1060.0
For internal use only
5.2
Setting the clock
After the appliance has been connected to the house mains or after a power failure, four dashes (--:--)
appear in the display. In order to enter the time, proceed as described below:
1. Press the button “Set time”.
(The hours flash in the display “Time and
modes”).
2. Turn the knob to set the time you want.
(The hours flash in the display).
3. Press the button “Set time”.
(The minutes flash in the display).
4. Turn the knob to set the time you want.
(The minutes flash in the display).
5. Press the button “Set time”
(The set time appears in the display).
After the time has been set and you want to change it, press the button “Set time” and set the new time
as described above.
The current time can also be displayed after the start of the set mode. Press the button “Set time”.
(The time appears for 2 seconds).
Summary of Contents for EMWK 1060.0
Page 1: ...e y g eoc IHNHFH...
Page 26: ...Service Manual EMWK 1060 0 26...
