Kuppersbusch EEBD 6600.2, Operating Instructions Manual, Page: 66 / 84

13 Descaling
66
Rinsing phases
When flashes in the display,
➤
remove the water tank and pour out the descaler.
➤
Fill the water tank with 1.25 l warm water.
➤
Put the water tank back.
– appears in the display.
– The appliance is in the rinsing phase.
– Then flashes in the display.
➤
Remove the water tank and pour out the water.
End of descaling
When appears in the display,
➤
remove, empty and dry the water tank.
– The message goes out and the time is visible again.
➤
Wipe up any liquid that has collected on the cooking space floor with a soft
cloth.
An optimal number of rinsing cycles are run depending on the level
of soiling of the liquid being pumped off.
As the water is heated up during final rinsing, the door may steam up.
If, after descaling, the , , or + operating modes
are used, the water in the water tank may be cloudy at the end of
cooking. This affects neither the cooking characteristics nor the
quality of the food being cooked.