Kuppersbusch EDG6260, User Manual, Page: 26 / 30

51
EN
Installation instructions
Before installation
Check that the input voltage indicated on the
characteristics plate is the same as the 4voltage of the
power outlet you are going to use.
Open the oven door and take out all the accessories
and remove the packing material.
Warning! The front surface of the oven may be
covered in a protective film . Before using the oven for
the first time, carefully remove this film, starting on the
inside.
Make sure that the oven is not damaged in any
way.
Check that the oven door closes correctly and
that the interior of the door and the front of the oven
opening are not damaged. If you find any damage
contact our Customer Care Centre on the number
supplied on the back cover of this handbook.
DO NOT USE THE OVEN if the power cable or the
plug is damaged, if the oven does not function
correctly or if it has been damaged or dropped.
Contact our Customer Care Centre on the number
supplied on the back cover of this handbook.
Put the oven on a flat and stable surface. The oven
must not be installed close to any sources of heat,
radios or televisions.
During installation, make sure that the power cable
does not come into contact with any moisture or
objects with sharp edges and the back of the oven.
High temperatures can damage the cable.
Warning: after the oven is installed you must make
sure you can access the plug.
After installation
The oven is equipped with a power cable and a plug
for single phase (household) current, 230-240V ~
50Hz.
If the oven is to be installed on a permanent basis
it must be installed by a qualified technician. In such a
case, the oven should be connected to a circuit with an
all-pole circuit breaker with a minimum separation of 3
mm between contacts.
WARNING: THE OVEN MUST BE EARTHED.
The manufacturer and retailers do not accept
responsibility
for any damage that may be caused to
persons, animals or property if these installation
instructions are not observed.
The oven only functions when the door is closed
correctly.
Before the first use, clean the inside of the oven and
the accessories, following the cleaning instructions
given in the “Oven cleaning” section.
During installation, follow the instructions supplied separately.