Kuppersberg FG 63, Technical Passport, Page: 9 / 52

9
ENGLISH TECHNICAL PASSPORT
Gas hob
Position the product so as to reach
to the power cord. Supply voltage of
your product is 220Y. The earth plug
on the power cord should be definitely
used with an earthed power socket.
Â
Our products are fueled by
liquefied petroleum gas or natural gas
depending on its version (optional).
Â
Apply to the authorized service
center to switch your product to
liquefied petroleum gas or Natural Gas.
Â
Have the mains connection and
earthing installation by a qualified
electrician.
Â
Our firm may not be held
responsible for any damages that may
arise from failure to comply with the
instructions given above.
Â
When you use your cookers
with liquefied petroleum gas, use
pressurereducing valve TSE 300 mm SS
with outlet pressure of 1.5 kg/h.
Connect your product to liquefied
petroleum gas cylinder by the short
plastic hose in a gas-proof manner.
Connect your product to the Natural
Gas cock by the spiral hose in a gas-roof
manner.
The hose to be used should not
be longer than 125cm for safety
purpose.
When placing your product, take
care that the gas hose or power cord
does not remain under the body. Do not
SECTION 3.
THINGS TO BE CONSIDERED PRIOR TO USE OF THE TABLE
TOP COOKER AND SAFETY WARNINGS
run it near the burners, otherwise cable
insulation may he damaged.
When the power cord is damaged,
replace it by visiting the nearest author-
ized service center.
When gas connection is completed,
do not move your product beyond the
limits that the gas hose allows. Any
forcing may cause gas leakage from the
hose connections.
Do not operate it without
putting pan, etc. on the electric
cooker.
The stainless steel around the elec-
tric cooker may change color due to
heat. It is not problem for use of it.
In order to make your product ready
for use, you should first prepare the in -
stallation place and complete the elec-
tric installation.
And then call our authorized service
personnel.
Note: Start use after removal
of the protective film on Inox
surface.