Kuppersberg FG 63, Technical Passport, Page: 22 / 52

22
TECHNICAL PASSPORT ENGLISH
Gas hob
FAILURE. THINGS TO BE PERFORMED IN CASE OFFAILUR
IF THE BURNER DOES NOT BURN AFTER A NUMBERLF
THE COOKER BURNS OUT AFTER IT BURNS? OF ATTEMPTS?
SECTION 7.
INFORMATION ABOUT THE TRANSPORTATION
Repair of electric and gas equipment
should be performed by our authorized
service centers only.
Any wrong and faulty repair would
pose danger for the user.
If the supply cord gets damaged,
this cord should he replaced by the
manufacturer or its service agency or
an equivalently competent person to
prevent occurrence of any dangerous
condition.
Â
Control whether the burner
apparatus has been installed correctly;
Â
Gas stop cock should he open;
Â
Burner apparatus should be clean
and dry;
Â
Flame holes should he
unobstructed and dry;
Â
Home electric fuse should be on.
Â
Furthermore, call our customer
services and authorized service center.
You may ignite your cooker by use of a
match. Refer to the section “Operation in
case of Power Failure”.
Â
Make sure the burner lid was
positioned correctly.
If the electric ignition system
(lighted of the cooker’s burner
apparatus does not operate:
Â
Control whether there is any
food remnant between the ignition
electrode and burner lid. Remove them
off completely. The ignition electrode
should be dry.
If the flame changes color
suddenly?
Â
Control whether the burner
apparatus was mounted correctly.
Â
If you need to transport it:
Â
Keep its original box;
Â
Transport it in its original box
and comply with the handling symbols
on the box. If its original box is not
available:
Â
Attach the gas caps and grates to
the burner tray by use of tape;
Â
For electric cooker versions, cover
the electric burning parts by bubble
nylon or thick cardboard;
Â
Take precaution against any
impact to the outer surfaces of your
product. Do not place any load on it;
Â
Keep your product in parallel to
the ground (the top of it to be up) during
transport.