7
VEGA User Manual_
March 2013 Edition
Placing into service
Cables, extensions and plugs
Only use approved cables. The maximum recommended cable length is 7m; for greater lengths use cables with a
larger cross-section.
CAUTION
Using the machine with unsuitable cable cross-sections and/or excessively long cables
may cause injury or damage to people or objects.
WARNING
The machine must never be moved using its cable and the cable must never be pulled
when disconnecting from the socket.
WARNING
Keep the cable away from sources of heat, oil and sharp edges.
BEWARE
MACHINE WITH 230V
∼
50Hz SINGLE PHASE MOTOR
For machines with a 230-240V~50Hz single phase motor (Europe),
a
HO5VV-F-3x1,5 mm
2
HAR-
approved power supply cable must be used along with an approved
SHUKO 2P+T16A 200÷250V
plug.
MACHINE WITH 220V
∼
60Hz SINGLE PHASE MOTOR
For machines with a 220V~60Hz single phase motor,
a
HO5VV-F-3x1,5 mm
2
HAR-approved power
supply cable must be used along with an approved
SHUKO 2P+T16A 200÷250V
plug.
MACHINE WITH 115V
∼
60Hz SINGLE PHASE MOTOR
For machines with a 115V~60Hz single phase motor,
a
SEO 12/3 105
HAR-approved power supply cable
must be used along with an approved
TWIST LOCK 16A 125V
plug.
Instructions on removing sawdust generated during use
HAZARD
Sawdust can ignite spontaneously and
cause injury or damage. It must be
disposed of appropriately. Always empty
the sawdust into metal containers which
are located outside the building.
HAZARD
Sawdust can ignite spontaneously and
cause injury or damage. Empty the
contents of the dust bag when it is 1/3 full.
Empty the dust bag at the end of each
machine use. Never leave the dust bag
unattended when it contains sawdust. Do
not empty the contents of the dust bag
above a fire.
Recommendations on prevention measures for users
Personal safety measures
WARNING
Sawdust can spread through the air and be inhaled when using the sander. Always
wear a dust mask when using the sanding equipment.
WARNING
The eyes and/or body may suffer injury if personal safety clothing is not used. Always
wear safety goggles, protective clothing and a dust mask during sanding operations.
