Kunzle & Tasin VEGA User & Maintenance Manual Download

Page: 4 / 24

VEGA User Manual_

March 2013 Edition

Key for machine symbols

READ THE INSTRUCTIONS CONTAINED IN THIS
USER AND MAINTENANCE MANUAL BEFORE
USING THE MACHINE

HEARING PROTECTION DURING USE IS
RECOMMENDED

PROTECTION OF THE AIRWAYS DURING USE IS
RECOMMENDED

HAZARD DUE TO ELECTRICITY

HAZARD DUE TO MOVING PARTS

Operator safety instructions

HAZARD

means

Failure to comply with

HAZARD

notices on the machine or in this

manual may result in death or serious injury to the operator or other
people. Read and comply with all

HAZARD

notices on the machine

or in this manual.

WARNING

means

Failure to comply with

WARNING

notices on the machine or in this

manual may result in injury to the operator or other people. Read
and comply with all

WARNING

notices on the machine or in this

manual.

CAUTION

means

Failure to comply with

CAUTION

notices on the machine or in this

manual may result in injury to the operator or other people. Read
and comply with all

CAUTION

notices on the machine or in this

manual.

HAZARD:

Failure to read the

VEGA

machine manual before operating, adjusting or performing maintenance

operations on the machine could cause injury or damage to persons or objects. Anyone operating the
machine should understand how to use and operate it before starting it up.

Summary of Contents for VEGA

























Search results

Summary of Contents for VEGA

Reviews:

Related manuals for VEGA

Brands by name

Popular brands

Kunzle & Tasin VEGA, User & Maintenance Manual

Search results

Summary of Contents for VEGA

Reviews:

Related manuals for VEGA

Brands by name

Popular brands