13
VEGA User Manual_
March 2013 Edition
Machine adjustment procedures
Abrasive assembly procedures
1. Ensure the electric cable is connected from the power.
2. Turn the machine over, resting the handles on the floor.
3. Remove the
screws Y (fig. 1)
and the tapered washer
keeping
disk P
locked with
pin A
in the hole on the
machine body.
.
4. Ensure the surface of the disc is clean and select an
abrasive disc (178mm diameter) with a suitable grain
which does not have a damaged surface.
5. Secure the abrasive disc using
screws Y (fig. 1)
and
the tapered washer keeping
disk P
locked with
pin A
in
the hole on the machine body.
As an alternative to the standard version (with
professional disc), when ordering it is possible to
request the version with velcro-backed disc or
subsequently with kit (P/N 5299940250).
