DCS25 Manual
20
20
Cleaning and Maintenance
Read the chapter about safety precautions before cleaning and maintenance.
The easiest way to clean the machine is as follows:
• The Pre-filter is cleaned as required.
• Wipe the machine on the outside with a dry or damp cloth.
The motor top is made of maintenance-free parts and
therefore needs no daily maintenance, apart from external
cleaning and check that the cords and plugs are undamaged.
The easiest way to clean the motor top is with a damp cloth.
Do not aim jets of water directly at the motor top.
In order to avoid stop in operation and also to make sure that
the safety of the vacuum cleaner is intact, it is recommended
that the electrical parts are inspected annually by an
authorized technician.
It is recommended to have an authorized service centre
inspect the motor bushings of the brushes after approx. 800
working hours, and if necessary, replace them. In this way the
life of the suction motor is prolonged.
If the brushes are not replaced before being completely
worn out, the motor may seize up, and this may require a
replacement of the motor.
Check / maintenance of the machine
The machine must always be emptied after use. If the
machine is left with dust, there is a risk of self-ignition.
Reordering of filters and service parts
IMPORTANT!
The machine must not be connected to the
power supply during service and cleaning.
Maintenance of the Motor Top
Description
Before/After use
Month/year
Hours
Check/replacement of brushes
750–800
Check of HEPA filter and machine
yearly
Emptying and cleaning
After use (as required)
Check of filters and machine, generally
Before use
Check of cord, plugs and outlet for tools
Before use
Check of alarm (beeper)
Before use
Brushes
XX.XX.XXXX
Pre-filter / membrane filter
84.67.xxxx
HEPA filter
84.67.5006
Collection bags
84.64.0333
