KUHN Omnis 1000, Operator'S Manual

Page: 84 / 188

Mounted field sprayers
82
OMNIS
Putting into service
3-point attachment
- Slowly reverse the tractor until the lower link ball joints
are in line with the lower hitch pins.
- Unlock and remove the lynch pin of each hitch pin.
- Couple the lower link ball joints to the lower hitch pins.
- Secure each lower link with lynch pin.
- Unlock and remove the lynch pin of the hitch pin.
- Remove the upper hitch pin.
- Position the top link inside the upper coupling yoke.
- Insert the upper hitch pin inside the upper coupling
yoke hole.
- Secure hitch pin with lynch pin.
- Adjust the top link length so that the machine is
horizontal with regards to the ground.
- Raise machine using tractor lift.
When optional equipment is used, follow
specific procedures mentioned in the related
section:
- Automatic hitch.