KUHN Omnis 1000 Operator'S Manual Download

Page: 114 / 188

Mounted field sprayers

112

OMNIS

Machine use

Filling by suction:

- Open the manhole cover.
- Place valves in external suction position:

• Suction valve: 1
• Rinsing tank valve (optional): 4
• Accessory valve: G
• Product incorporator lever (optional): E
• Discharge valve: C

- Remove the quick coupler plug (1).
- Connect the hose to the quick coupler (1).

- Engage the tractor PTO.
- Fill the tank.
- Place the suction valve in position 2.
- Disengage tractor PTO.
- Disconnect hose from the quick coupler (1).
- Reinstall quick coupler plug (1).
- Close the cover.

For models fitted with DPAE regulation (output
proportional to the groundspeed):

- Go to manual mode.
- Open the flow regulation valve.

Summary of Contents for Omnis 1000





























































































































































































Search results

Summary of Contents for Omnis 1000

Reviews:

Related manuals for Omnis 1000

Brands by name

Popular brands

KUHN Omnis 1000, Operator'S Manual

Search results

Summary of Contents for Omnis 1000

Reviews:

Related manuals for Omnis 1000

Brands by name

Popular brands