HR4004D-4504D
102
10. - Maintenance and storage
KN208JGB_C
Power harrow
- Grease the input shaft before reassembling all
components:
• Torque (3): 30 daNm (221 lbf ft).
10.5 Storage
10.5.1 At the end of each season
- Clean the machine with a garden hose.
- Check and replace worn or damaged blades.
- Check and replace worn or damaged scraper
plates.
- Touch up any areas of damaged paintwork.
- Put the machine under cover in a dry place.
- Remove and service the PTO shaft. Follow the
instructions in the PTO shaft operating manual.
10.5.2 At the start of each season
- Re-read the operators' manual.
- Check that all nuts and bolts are sufficiently
tightened.
- Make sure that all protection devices are in place
and in good condition.
3
