6. - Putting into service
HR4004D-4504D
39
KN208JGB_C
Power harrow
Lateral adjustment of the lower links
- Distribute the play on each side of the lift linkage.
-
Check that the stabilisers function properly
(Adjustment, Locking / Unlocking).
6.1.3 Coupling the machine
- Remove the lower hitch pins.
- Position lower links in accordance with tractor
attachment category:
Category 2 linkage (a) (Position only to be used on
exceptional occasions):
• L = 825 mm (2’8’’) (approximately).
Category 3 linkage (b):
• L = 965 mm (3’2’’) (approximately).
This position must be used when the power
harrow is used in combination with a seed
drill.
- Position ball joints of tractor lower links in line with
holes of machine lower yokes.
- Insert lower hitch pins and secure them with lynch
pins.
- Attach top link with hitch pin.
=
=
L
L
a
L
b
