8. - Instructions for work
HR4004D-4504D
59
KN208JGB_C
Power harrow
8. Instructions for work
8.1
Putting the machine into work
position
Before placing the machine in working
position:
- Check that nobody is within the machine
pivoting area.
- If there is someone, make sure the person
moves away.
When optional equipment is used, follow
specific procedures mentioned in the related
section:
•
Optional equipment / Hydraulic lift
linkage / Putting the machine into work
position.
• Optional equipment / Rear attachment
with double acting hydraulic lift / Putting
the machine into work position.
From the transport position:
- Lower the machine until the blades are at a
distance of 100-150 mm (3.9’’-5.9’’) with regards to
the ground.
The machine is in working position.
