- 16 -
Position of
21
24
19
26
17
28
gearwheels
24
21
26
19
28
17
1000 rpm (min
-1
)
*234
306
196
366
162
441
Standard
Optional
17/28 teeth
(Set No 123 7650)
Optional
19/26 teeth
(Set No 123 7420)
*
P.T.O.
rpm (min
-1
)
Rotor speed (rotational frequency)
Set of gearwheels
* Factory pre-set
ROTOR SPEED (ROTATIONAL FREQUENCY)
The HR 5002 DR / 6002 DR / 5002 DR - S / 6002 DR - S must only be driven at a PTO speed (rotational frequency)
of 1000 rpm (min
-1
). All gearboxes are factory fitted with a rear PTO shaft which rotates at the same speed (rotational
frequency) as the tractor PTO shaft. An extra implement can be driven by a secondary PTO shaft which should
be assembled and used according to the legislation in force at the time.
Remove the PTO shaft cover (3) and mount the plastic guard cone (4) (code 587 070 10) supplied with the machine
(photo 8 A).
The rear PTO shafts are 1 3/8" 6 spline profile, and must not be used to transmit more than 37 kW (50 hp).
If the rear PTO shafts are not used, always put cover (3) in place (photos 8 and 8 B).
To invert the pinions, position the machine horizontally.
Remove the covers (1) from the side gearboxes by
removing the 4 screws (2) and pulling towards the rear
(photo 8).
Invert the pinions.
8A
8
8B
