- 31 -
1. The securing bolt must be replaced :
- When a visible deformation is found.
- When the locking compound on the threads has
worn away or if the locking compound has become
inoperational due to inclusion of water, oil or dirt.
- When wear on the head reaches the contact area of the knife.
- When the diameter (D) of the bolt is less than 15 mm.
2. The nuts must be replaced :
- When the contact washer has lost its elasticity or when it
loosens from the nut,
- When wear on the nut reaches a = 5 mm
FOR THE CORRECT OPERATION OF YOUR MACHINE
ALWAYS USE GENUINE KUHN SPARE PARTS.
Summary of Contents for GMD 602 F
Page 11: ... 9 ...
