- 16 -
Make sure PTO shaft length is correct :
- When the PTO shaft is in its maximum extended position, a minimum tube overlap of 300 mm (12") must be
maintained.
- When the PTO shaft is in the maximum overlap position (retracted), tubes must not butt against the yokes.
A safety clearance (A) of 1 cm (1/2") must be maintained (fig. A).
b) GMD 602F-702F-802F [540 / 1000 rpm (min
-1
)] (option)
Connect the PTO shaft to the mower's central gearcase and to the tractor's 540 or 1000 rpm
(min
-1
) PTO stub
(see photos 13, 14, 15 and 16).
PTO guard (P) must be mounted on the stub used to connect the PTO shaft (T) and the cap(C)
must be installed on the non used stub.
13
14
15
16
Summary of Contents for GMD 602 F
Page 11: ... 9 ...
