- 19 -
TRANSPORT
BEFORE TRANSPORTING THE MOWER ON PUBLIC ROADS, THE OPERATOR MUST ALWAYS
MAKE SURE THAT THE MACHINE CONFORMS TO THE LEGISLATION GOVERNING THE USE
OF AGRICULTURAL VEHICLES ON THE ROAD.
Before going on the road or transporting the mower from one field to another, proceed as follows :
- Check that the lever (L) is locked in place in the forward notch (A) of the selector plate (photo 8A, page 14).
- Activate the tractor hydraulic lift until the machine comes to a stop.
- Using levers (K) fold the transport locks (J) towards the front until engaged (photo 20 B).
- Using the box spanner (P) delivered with the machine, release the lock on the front protector (A) (photo 20).
- Pivot the 2 side protection flaps (B) towards the inside and lock them by lowering and engaging the front protection
flap (photo 20 A).
Slightly lower the mower to double check that the lock has latched in properly. The cutting unit and the headstock
must lower simultaneously.
When using public roads, employ at least one person to warn the driver of the vehicle of any
potential danger and give him indications to manoeuvre and travel safely, especially when
leaving the farm, on emerging roads and junctions.
20A
20B
20
20C
Summary of Contents for GMD 602 F
Page 11: ... 9 ...
