KUHN BELT-DRIVEN MINOTOR 3060, Operator'S Manual

Page: 28 / 64

28
RAISING / LOWERING THE ARM
Lever B
Push the lever up to raise the arm.
Pull the lever down to lower the arm.
OPENING / CLOSING THE GRAB
Lever B
Turn lever B to the left to open the grab out of the body.
Turn lever B to the right to bring the grab in towards the body.
CHANGING THE TURBINE SPEED
Lever C
Push the lever for a turbine speed of 270 min -1 . This speed is used for silage distribution.
Pull the lever for a turbine speed of 540 min
-1
. This speed is used for straw blowing.
CONVEYOR OPERATION
Switch D
Turn switch to the left to run the conveyor forwards, only if the beater bar is engaged.
Turn switch to the right to run the conveyor in reverse.
ADJUSTING THE CONVEYOR SPEED
Switch E
Turn switch to the left to increase the conveyor speed.
Turn switch to the right to reduce the conveyor speed.
The conveyor speed increases on a scale from 0 to 10. The current speed is indicated on the front of
the machine.