Subject to modifications
Button 1 to button 6
Depending on the display, the
buttons 1 to 6
trigger different actions. Description on the following pages.
Button ON
-
Switches the spreader on and off.
-
The function of this button never changes.
When switching off, all drives are stopped and the rotating beacon as well as the working headlight will
be switched off at the control system.
Before the control system is switched on, starting of the vehicle motor is indispensable as the
voltage may drop extremely during the starting procedure. If the control system is already switched
on, in particular vehicles with a board voltage of 12 Volt recognize this as error “low voltage”.
Turning knob left/middle/right
The turning knobs are provided with a detent mechanism.
Turning from one detent to the next produces a control tone. The control tone may be switched off.
The turning knobs may be pressed and receive a different function. If a turning knob must be pressed to change values,
this is specially indicated in the description. A normal change of values is executed in unpressed condition.
Operating instructions 7
E
ngl
is
h
