Subject to modifications
B: Motor unit - diesel
1.) Starting of diesel unit
= Motor unit running
= motor unit not running.
= Preheating of diesel unit
For remote service of the diesel unit via the control system k-tronic, the key switch at the operating
unit of the diesel unit must be set to “0”.
The display shows
-Hold button 3 pressed, the symbol of button 3 changes to .
Display changes to
-
Press button 1. Short tipping is enough, because the starting pulse is saved in the control system. Release button 3.
Preheating of engine is indicated. Depending on temperature, this procedure may take up to 15 seconds.
The display indicates
-
As soon as the diesel unit has started, the preheating light goes out.
Display changes to
If, contrary to expectations, the diesel unit should not start, it is possible that the ignition at the diesel unit is switched
on.
If the diesel unit has been started via the key switch at the unit, it is not possible to control it via the control system
k-tronic.
24 Control system k-tronic
E
ngl
is
h
