Subject to modifications
Simulation speed km/h
Set the speed for manual operation in this setup screen.
To validate the new settings,
the symbol must appear at the operator display. Then, the spreader works independently of the speed signal.
Change the value for simulation speed in the setup screen with the middle turning knob.
Key tone ON
This soft switch sets whether the push of a button and the activation of the turning knob are confirmed by a signal tone.
-
if a appears next to button 5, the tone may be switched off.
-
if a appears next to button 5, the tone may be switched on.
For controlling purposes, the current switching state for the key tone is displayed in the menu line.
-
tone switched on,
-
tone switched off.
Show output counter (option)
This soft switch sets whether the output counter readings (option) should be displayed at the operator display.
-
if a appears next to button 5, the output counters can be shown.
-
if a appears next to button 5, the output counters can be hidden by the push of a button.
For controlling
purposes, the current switching state for the display of output counters is displayed in the menu line.
-
Output counter readings are shown
-
Output counter readings are not shown.
This menu point is only displayed for spreaders with output counters available.
44 Control system k-tronic
D
eu
tsch
