Mounting the fixture upright
To mount the fixture upright, place the fixture on a stable non-flammable surface that will
support more than the 3.6 kg weight of the fixture. If the surface is above floor height, use
safety cables to secure the fixture to the surface.Mounting the fixture on a truss
To mount the fixture upright, place the fixture on a stable non-flammable surface that will
support more than the 3.6 kg weight of the fixture. If the surface is above floor height, use
safety cables to secure the fixture to the surface.
Safety Cable
We strongly recommends that you use a safety cable when mounting any fixture. You must
supply your own safety cable and verify that the cable is capable of supporting the weight of
the fixture. You can order safety cables from your Conic Lighting Designs dealer/distributor.
(see
Related Products and Accessories
on page 5).
Clamp
You must supply your own clamps and verify the clamp is capable of supporting the weight of
the fixture. You can order C-clamps for truss mounting from your Conic Lighting Designs
dealer/distributor (see
Related Products and Accessories
on page 5).
Mounting Procedure
To mount fixtures on a truss:
1. Disconnect power to the fixture. If the fixture has been operating, allow the fixture to cool
before handling.
2. Always stand on a firm, stable surface when mounting a fixture to its support. The fixture
should be at a height where you can comfortably work on it, and should either be resting
on a stable surface, or held securely.
3. Attach suitable clamp through the center hole on the base of the fixture.
4. Tighten the clamps firmly to the fixture’s base and to the support.
5. Loop one or more suitable safety cables around the support, through the side holes in the
fixture’s base.
Holes for
attaching
clamps &
safety wires
!
!
!
!
!
!
!
11
