manualshive.com logo in svg

Kudux LM 2013, User Manual

Share
Download
Kudux LM 2013 User Manual Download Page 24

Appendix

Important Safety Information

Warning: For Continued Protection Against Fire 

1. This equipment is designed for use with specified LED only. Use of any other type LED may 

be hazardous and may void the warranty.

2. Do not mount on a flammable surface.
3. Maintain minimum distance of 1.0 meter from combustible materials.
4. Replace fuses only with the specified type and rating.
5. Observe minimum distance to lighted objects of 1 meter.
6. This equipment  is designed for  connection to branch  circuit  having a maximum  overload 

protection of 20 A.

Warning: For Continued Protection Against Electric Shock 

1. If this equipment  was received without  a line cord plug, attach the appropriate line cord 

plug according to the following code: 
• brown–live

• blue–neutral

• green/yellow–earth 

2. In different countries, the  colors of the  cores in the mains lead of this equipment may not 

correspond with the colored  markings  identifying the terminals in  your  plug,  proceed as 

follows: 

3. This equipment must be earthed.
4. Equipment  suitable  for  dry  locations  only.  Do  not  expose   this  equipment  to  rain  or 

moisture.

5. Disconnect power before servicing.
6. Refer servicing to qualified personnel only.

Warning: For Continued Protection Against Injury To Persons 

1. Use secondary safety cable when mounting fixtures. 
2. Equipment surfaces may reach very high temperatures. Allow a  minimum  of 10 minutes for 

cooling before handling.

onic Lighting Designs

   26 

Summary of Contents for LM 2013

























Reviews:

No comments

Brands by name

Popular brands

Load more brands