Kudux LM 2013, User Manual

Page: 17 / 24

2. Scroll to the Dimmer Speed menu. Press <Enter>.
3. Scroll to the desired value .
4. Press <Enter> to store.
DMX Reset
When this option is enabled, you’ll be able to perform a reset from a lighting console. To
enable the DMX reset:
1. Press <Set/Esc> until SET appears on the display. Press <Enter>
2. Scroll to the
DMX Reset menu. Press <Enter>.
3. Scroll to Enable . Press <Enter> to store.
Fan
Through this option you can choose the fan cooling speed. It can be auto regulated by
temperature control and maximum speed. To change fan behavior:
1. Press <Set/Esc> until SET appears on the display. Press <Enter>
2. Scroll to the
Fan Speed menu. Press <Enter>.
3. Scroll to the desired value .
4. Press <Enter> to store.
Information
This option shows information on the fixture as date, time, working time, ...
The DMX Menu
To access DMX Menu press <Up>.
DMX Address
The DMX start channel identifies each fixture on a DMX link. You must assign a DMX start
channel to each fixture on the link.
The DMX Address menu allows you to change the DMX start channel that is currently assigned
to the fixture. Be sure you do not overlap fixture channel ranges when changing the DMX start
channel.
To change the DMX start channel:
1. Press <Up> until DMX Menu appears on the display. Press <Enter> to select.
2. Scroll the DMX menu until DMX Address appears on the display. Press <Enter> to
select.
3. Scroll to select a new DMX start channel.
4. Press <Enter> to accept the new DMX start channel.
No DMX signal
This option sets the behavior of the fixture in case of DMX data loss. To change to the desired
fixture behavior:
1. Press <Up> until DMX Menu appears on the display. Press <Enter> to select.
2. Scroll the DMX menu until No DMX signal appears on the display. Press <Enter> to
select.
3. Scroll the menu until the desired behavior appears on the display. Press <Enter> to
store.
You can choose between the following fixture behaviors in case of data loss
! ! ! ! ! ! ! ! 19