Hydraulic Crimper Tools
KuDos Industrial Inc. LLC
7
A
FTER
USE
,
DON
’
T
FORGET
TO
...
• Clean the product and check to ensure that all pieces are in
working condition.
• Apply rust preventive oil to the product and blades before
returning it to the carrying case.
6. The rapid motion of the piston with low hydraulic pressure will
convert to a slow motion with high pressure once the upper
and lower dies press together.
7. The operation will be complete when the hydraulic pressure
reaches 700 bar and the relief valve activates. There is an
audible click as the pressure is relieved.
8. Turn the moving handle clockwise and press the handles
together to return the piston to start position.
9. Follow connector specifications to apply the right number of
crimps. See the diagrams on page 9 for the crimping sequence.
www.ptr.co.th
**IMPORTANT**
**Under any operation, the piston
MUST BE FULLY RETRACTED
to keep the tool in good condition.
**Do not test the crimper
without dies
to avoid damage C-Head
