6
KuDos Industrial Inc. LLC
Hydraulic Crimper Tools
Operating Instructions
BEFORE USE, DON’T FORGET TO…..
• Make sure all parts of the product are clean and rustless, and that
no loose parts exist.
• Check that no leakage occurs while the tool is resting or while the
product is tested without cables.
1. To start, rotate the moving handle clockwise
and bring the tool handles together.This
willdepress the release valve stem to fully retract
the piston.
2.
Place the upper die by pulling up the spring pin
and pushing the die into the opening of the die
seat along the groove.
3. To place the lower die, push down the die
release button on the piston and slide the die onto
the die seat along its groove.
4. Position the cable and fitting into the C-head
opening. Pump the moving handle back and forth
to advance the piston.
5. Press the cable and fitting into the center of the
upper die as the piston advances. Off-centered
crimping may damage or deform the tool head.
www.ptr.co.th
