KuDos Mechanical
Trouble-Shooting
■
Compression of lugs cannot be completed:
A. Applied cables or terminals are over-specification.
B. Operation instructions were not followed as the product been damaged.
C. Internal leakage: Contact your
KuDos®
service representatives.
■
H
andle is stuck or unable to rotate to release pressure:
A. Clean the moving handle to remove impediments.
B. Pressure can be released by pressing down the release lever manually.
C. Torsional spring is stuck: Contact your
KuDos®
service representatives.
■
Dies cannot be set in place or cannot be removed:
A. Deformed C-head or dies. Contact your
KuDos®
service representatives.
B. Clean the grooves on C-head to remove impediments.
C. Clean the die seats on C-head to remove impediments.
■
The piston is stuck or is unable to retract after operation:
The piston may have been deformed by uneven stress distribution when the
product was operated with off-centered fittings. Contact your
KuDos®
service
representatives.
■
Replace any worn or damaged parts immediately. Do not use parts
not supplied by Kudos.
■
Contact KuDos® service representatives to request parts or for
problems not shown above.
■
Do NOT attempt to disassemble or repair the product.
■
Kudos hydraulic tools must be serviced by a qualified technician.
Air in the Hydraulic System:
■
Air in the hydraulic system may cause the indent pieces from advancing or
cause it to advance slowly. To eject the air from the hydraulic circuit:
1. Position the tool upside-down in a vice with the pump handle in the open
position.
2. Unscrew the main handle from the body, then remove the reservoir filler
cap(#1).
3. Pump the moving handle a few times to advance the ram.
4. Rotate the pump handle and close it to release the pressure in the hydraulic
circuit until the piston is fully retracted and the oil has returned completely
into the reservoir.
5. Repeat the process several times to assure that all air bubbles are ejected.
6. Close the rubber reservoir and insert the the reservoir filler cap.
Reassemble the main handle.
7
www.ptr.co.th
