Troubleshooting
The fitting can not
be crimped:
Handle is stuck or
can’t release the
pressure:
Piston action is slow
or spongy:
Hydraulic Crimper Tools
12
KuDos Industrial Inc. LLC
•
1. One or more tool parts require repair. Replace the
parts immediately to prevent serious personal injury or
property damage.
• 2. Applied fitting is over-specification.
•
3. Insufficient hydraulic fluid. Follow steps on page 10 to add
fluid.
• 4. The cylinder piston might be deformed after crimping
an off-center fitting, or from the tool being used in a
manner for which it was not intended.
• 1. Clean the moving handle to remove impedi
ments.
• 2. Pressure can be released by pressing down the
release lever manually.
•
3. Torsional spring is stuck: Contact your KuDos®
service representatives.
•1. There is air in the hydraulic system. Follow steps on page
10 to expel any air in the system.
•2. Insufficient hydraulic fluid. Follow steps on page 10 to
add fluid.
www.ptr.co.th
