OPERATING THE MACHINE
20
STARTING
B
Operator's Seat
To avoid personal injury:
A
Make adjustments to the seat only while the
machine is stopped.
A
Make sure that the seat is completely secured
after each adjustment.
A
Do not allow any person other than the driver to
ride on the machine.
C
Travel adjustment
Unlock the travel adjust lever and slide the seat backward
or forward, as required. The seat will lock in position when
the lever is released.
To avoid personal injury:
A
Use extra caution when unlocking the travel
adjust lever because the seat might slide
forward by itself.
C
Suspension adjustment
Pull the suspension adjust knob and turn it to achieve the
optimum suspension setting. After setting, push back the
knob.
C
Lumbar support adjustment
Turn the lumbar support adjust lever to the desired
position.
C
Arm rest
Arm rest may be set at upright position if desired.
C
Arm rest angle adjustment
Turn the arm rest angle adjuster to the desired angle.
C
Backrest tilt adjustment
Turn the backrest tilt adjust knob to the desired angle.
A
After adjusting the operator's seat, be sure to check to
see that the seat is properly locked.
1. Adjust the operator's position and
engage the seat belt.
(1) Travel adjust lever
(2) Suspension adjust knob
(3) Lumbar support adjust lever
(4) Arm rest
(5) Arm rest angle adjuster
(6) Backrest tilt adjust knob
Summary of Contents for ZG327A-AU
