Kubota ZG327A-AU, Operator'S Manual

Page: 61 / 104

PERIODIC SERVICE 44
B
Checking and Cleaning Bottom Dust
Cover
1. If the dust or chaff has accumulated inside of the
bonnet screen, open the hood and push down the
bottom clean lever several times.
After cleaning, close the hood.
2. Open the oil cooler cover and make sure there is no
dust and foreign material.
B Checking and Cleaning Area Around
Engine to Prevent Overheating
To avoid serious injury or death:
A
Engine components can get extremely hot from
operation. To prevent severe burns, do not
touch these areas while the engine is running,
or immediately after it is turned off. Never
operate the engine without heat shields or
guards.
To avoid personal injury:
A
Be sure to stop the engine and remove the key
before cleaning.
A
Area around engine must be clean to prevent the
engine from overheating.
A Under the exhaust muffler must be clear of debris after
cleaning area around engine.
1. If the dust or chaff has accumulated between the
engine and frame, remove them by hand or air blow.
(1) Bottom clean lever
(2) Oil cooler cover (A) "PUSH DOWN"
(B) "OPEN"
(1) Area around engine
(1) Area around engine