Kubota ZD1011-AU, Operator'S Manual

Page: 9 / 102

SAFE OPERATION
-
2
5. Always use the seat belt when the ROPS is upright. Do
not use the seat belt if the ROPS is down or if there is
no ROPS. Check the seat belt regularly and replace if
frayed or damaged. Be certain that the seat belt can be
released quickly in the event of an emergency.
6. Do not operate the machine or any attachments while
under the influence of alcohol, medication, controlled
substances or when fatigued.
7. Do not wear loose, torn, or bulky clothing around
machine. The clothing may catch on moving parts or
controls, leading to the risk of accident. Wear and use
any additional safety items such as hard hat, safety
boots or shoes, eye and hearing protection, gloves,
etc., as appropriate or required.
8. Do not wear radio or music headphones while
operating the machine.
9. Do not operate the machine or any attachments while
using or texting with a cellphone or any other
electronic device.
Safe operation requires your full attention.
10.Carefully check the vicinity before operating machine
or any implement attached to it. Clear the work area of
objects (wires, rocks, etc.) that might be picked up and
thrown. Check for overhead clearance which may
interfere with a grass catcher.
11.Check parking brake and other mechanical parts for
correct adjustment and wear. Replace worn or
damaged parts promptly. Check the tightness of all
nuts and bolts regularly. (For further details, see
"PERIODIC SERVICE" and "ADJUSTMENT" section.)
12.Keep all shields and guards in place. Replace any that
are damaged or missing. Do not operate unless they
are functioning properly.
13.Before allowing other people to use your machine,
explain how to operate and have them read this
manual before operation.
14.Do not allow any bystanders around or near machine
during operation.
15.Do not allow passengers, children or non-qualified
operators on the machine at any time. The operator
must remain in the machine seat throughout
operation.
16.In addition to the design and configuration of
equipment, hazard control and accident prevention
are dependent upon the awareness, concern, and
prudence of personnel involved in the operation,
transport, maintenance of the equipment.
17.Evaluate the terrain to determine what accessories
and attachments are needed to properly and safely
perform the job. Keep the machine and attachments in
good operating condition and keep safety devices in
place and in proper working condition. Do not operate
unless they are functioning properly.
18.Do not modify the machine. Unauthorized modification
may affect the function of the machine, which may
result in personal injury.
19. Use only implements approved by KUBOTA. Use
proper ballast to front or rear of machine to reduce the
risk of upsets. Follow the "SAFE OPERATION"
procedures, specified in the manuals with equipment.
20. Keep your machine clean. Accumulations of dirt,
grease, and trash can contribute to fires and lead to
personal injury.
21. The exhaust gas from the muffler is very hot. To
prevent fire, do not expose dry grass, mowed grass, oil
and any other combustible materials to exhaust gas.
Use a spark arrester where required. Also keep the
engine and muffler clean all the time.
C
Starting
1. Always sit in the operator's seat when starting engine
or operating levers or controls.
2. Before starting the engine make sure that the motion
control levers are in neutral lock, the parking brake is
applied, and Power Take Off (PTO) is disengaged
(OFF).
3. Do not start engine by shorting across starter
terminals. The machine may start in gear and move if
normal starting circuitry is bypassed.
4. Do not operate or idle engine in a non-ventilated area.
Carbon monoxide gas is colorless, odorless, and
deadly.
5. Do not start engine while tilting deck.
6. Do not start the engine when the front or rear tires are
not on the ground.
7. Check before each use that operator presence
controls are functioning correctly. Test safety systems.
(See "Checking Engine Start System" and "Checking
OPC System" in "EVERY 50 HOURS" in "PERIODIC
SERVICE" section.)
Do not operate unless they are functioning correctly.
8. Check all fluids before starting.
C
Working
1. Do not turn sharply when driving at high speed.
2. To avoid tip over, slow down when turning on uneven
terrain or before stopping.
3. Do not operate near ditches, holes, embankments, or
other terrain, which may collapse under the machine
weight. The risk of machine tip over increases when
the ground is loose or wet.
4. Park the machine on a firm and level surface. Before
you get off, apply the parking brake, place the motion
control levers in their neutral lock positions, disengage
the PTO, lower all attachments to the ground, turn off
the engine, and remove the key.
5. Watch where you are going at all times. Watch for and
avoid obstacles. Be alert at curbs, shrubs, near trees,
and other obstructions and hidden hazards. Obstacles
can damage machine (fuel hoses, wire harness etc.).
2. OPERATING