Kubota WSM B1710, Workshop Manual

Page: 11 / 31

9
B1710 · B2110 · B2410 · B2710, WSM
SPECIFICATIONS
Note : * Manufacture’s estimate
The company reserves the right to change the specifications without notice.
W10368160
Model B2710HDB
PTO power 15.0 kW (20.4 HP)*
Engine
Maker KUBOTA
Model V1305-D18
Type Indirect Injection. Vertical, water-cooled, 4-cycle diesel
Number of cylinder 4
Bore and stroke 76
×
73.6 mm (2.99
×
2.90 in.)
.
Total displacement 1335 cm
3
(81.5 cu.in.)
Engine power (ECE-R24) 18.2 kW (24.7 PS)
Engine power
(SAE gross)
20.1 kW (27.0 HP)
Rated revolution 43.3 r/s (2600 rpm)
Maximum torque 79 N·m (59 ft-lbs)
Battery 12 V, RC : 79 min, CCA : 433 A
Starting system Electric starting with cell starter 12 V, 1.4 kW
Lubricating system Forced lubrication by trochoidal pump
Cooling system Pressurized radiator, forced circulation with water pump
Fuel Diesel fuel No. 2-D [above
−
10 °C (14 °F)], Diesel fuel No. 1 [below
−
10 °C (14 °F]
Capacities
Fuel tank 26 L (6.9 U.S.gals., 5.7 Imp.gals.)
Engine crankcase
(with filter)
4.1 L (4.3 U.S.qts., 3.6 Imp.qts.)
Engine coolant 4.5 L (4.8 U.S.qts., 4.0 Imp.qts.)
Transmission case 15.5 L (4.10 U.S.gals., 3.41 Imp.gals.)
Front axle case 5.3 L (5.6 U.S.qts., 4.7 Imp.qts.)
Tires
Front 7-12 (180 / 85D12)
Rear 12.4 -16
Dimensions
Overall length (with 3P) 2625 mm (103.3 in.)
Overall width (min. tread) 1365 mm (53.7 in.)
Overall height
(with ROPS)
2334 mm (91.9 in.)
Overall height
(top of steering wheel)
1375 mm (54.1 in.)
Wheel base 1666 mm (65.6 in.)
Minimum ground
clearance
308 mm (12.1 in.)
Tread
Front 935 mm (36.8 in.)
Rear 1050 mm (41.3 in.)
Weight (with ROPS) 842 kg (1857 lbs)
Minimum turning
radius
4WD with brake 2.1 m (6.9 feet)
Bi-speed turn
without brake
2.1 m (6.9 feet)
Clutch Dry single plate
Travelling
system
Steering Integral type power steering
Transmission Hydrostatic transmission with 3 speeds range gear shift
Brake Wet disk type
Differential Bevel gears
Hydraulic
system
Hydraulic control system Position control
Pump capacity
3P : 24.4 L/min. (6.4 U.S.gals./min., 5.4 Imp.gals./min.)
Power steering : 11.7 L/min. (3.1 U.S.gals./min., 2.6 Imp.gals./min.)
Three point hitch SAE Category
I
Max. lift
force
At lift points 830 kg (1830 lbs)
24 in. behind lift
points
650 kg (1433 lbs)
PTO system
Rear
PTO shaft SAE 1-3/8, 6 splines
Revolution 1 speed (540 rpm at 2600 engine rpm)
Mid.
PTO shaft USA No. 5 (KUBOTA 10-tooth) involute spline
Revolution 1 speed (2500 rpm at 2578 engine rpm)
KiSC issued 11, 2006 A