Kubota WSM B1710, Workshop Manual

Page: 10 / 31

8
B1710 · B2110 · B2410 · B2710, WSM
SPECIFICATIONS
Note : * Manufacture’s estimate
The company reserves the right to change the specifications without notice.
W10357020
Model B2410D B2410DB B2410HDB
PTO power 14.3 kW (19.4 PS)* 13.4 kW (18.2 PS)*
Engine
Maker KUBOTA
Model D1105-D18
Type Indirect Injection. Vertical, water-cooled, 4-cycle diesel
Number of cylinder 3
Bore and stroke 78
×
78.4 mm (3.07
×
3.09 in.)
.
Total displacement 1123 cm
3
(68.5 cu.in.)
Engine power (ECE-R24) 15.8 kW (21.5 PS)
Engine power
(SAE gross)
17.9 kW (24.0 HP)
Rated revolution 43.3 r/s (2600 rpm)
Maximum torque 67 N·m (49.4 ft-lbs)
Battery 12 V, RC : 79 min, CCA : 433 A
Starting system Electric starting with cell starter 12 V, 1.4 kW
Lubricating system Forced lubrication by trochoidal pump
Cooling system Pressurized radiator, forced circulation with water pump
Fuel Diesel fuel No. 2-D [above
−
10 °C (14 °F)], Diesel fuel No. 1 [below
−
10 °C (14 °F]
Capacities
Fuel tank 24 L (6.3 U.S.gals., 5.3 Imp.gals.)
Engine crankcase
(with filter)
3.0 L (3.2 U.S.qts., 2.6 Imp.qts.)
Engine coolant 3.8 L (4.0 U.S.qts., 3.3 Imp.qts.)
Transmission case 11.5 L (3.04 U.S.gals., 2.53 Imp.gals.)
12.5 L (3.30 U.S.gals.,
2.75 Imp.gals.)
Front axle case
3.7 L (3.9 U.S.qts.,
3.3 Imp.qts.)
4.5 L (4.8 U.S.qts., 4.0 Imp.qts.)
Tires
Front 6.00-12
Rear 9.5-18
Dimensions
Overall length (with 3P) 2430 mm (95.7 in.)
Overall width (min. tread) 1050 mm (41.3 in.)
Overall height
(with ROPS)
2298 mm (90.5 in.)
Overall height
(top of steering wheel)
1335 mm (52.6 in.)
Wheel base 1500 mm (59.0 in.)
Minimum ground
clearance
315 mm (12.4 in.)
Tread
Front 830 mm (32.6 in.)
Rear 810 to 1035 mm (31.9 to 40.7 in.)
Weight (with ROPS) 692 kg (1526 lbs) 702 kg (1548 lbs) 718 kg (1583 lbs)
Minimum turning
radius
4WD with brake 2.1 m (6.9 feet)
Bi-speed turn
without brake
– 2.1 m (6.9 feet)
Clutch Dry single plate
Travelling
system
Steering Integral type power steering
Transmission Gear shift, 6 forward and 2 reverse
HST with 2 speeds
range gear shift
Brake Wet disk type
Differential Bevel gears
Hydraulic
system
Hydraulic control system Position control
Pump capacity
3P : 16.6 L/min. (4.4 U.S.gals./min., 3.7 Imp.gals./min.)
Power steering : 9.8 L/min. (2.6 U.S.gals./min., 2.2 Imp.gals./min.)
Three point hitch SAE Category
I
Max. lift
force
At lift points 750 kg (1655 lbs)
24 in. behind lift
points
590 kg (1300 lbs)
PTO system
Rear
PTO shaft SAE 1-3/8, 6 splines
Revolution 1 speed (540 rpm at 2600 engine rpm)
Mid.
PTO shaft USA No. 5 (KUBOTA 10-tooth) involute spline
Revolution 1 speed (2500 rpm at 2578 engine rpm)
KiSC issued 11, 2006 A
Find manuals at https://best-manuals.com Find manuals at https://best-manuals.com