Kubota WSM B1710, Workshop Manual

Page: 9 / 31

7
B1710 · B2110 · B2410 · B2710, WSM
SPECIFICATIONS
SPECIFICATIONS
Note : * Manufacture’s estimate
The company reserves the right to change the specifications without notice.
W10281170
Model B1710D B2110D B2110DB B2110HDB
PTO power 10.5 kW (14.3 PS)* 12.7 kW (17.3 PS)* 12.0 kW (16.3 PS)*
Engine
Maker KUBOTA
Model D905-D18 D1005-D18
Type Indirect Injection. Vertical, water-cooled, 4-cycle diesel
Number of cylinder 3
Bore and stroke
72
×
73.6 mm
(2.83
×
2.90 in.)
76
×
73.6 mm (2.99
×
2.90 in.)
.
Total displacement 898 cm
3
(54.8 cu.in.) 1001 cm
3
(61.1 cu.in.)
Engine power (ECE-R24) 12.1 kW (16.5 PS) 14.0 kW (19.0 PS)
Engine power
(SAE gross)
13.4 kW (18.0 HP) 15.7 kW (21.0 HP)
Rated revolution 43.3 r/s (2600 rpm)
Maximum torque 51 N·m (37.6 ft-lbs) 59 N·m (43.5 ft-lbs)
Battery 12 V, RC : 79 min, CCA : 433 A
Starting system Electric starting with cell starter 12 V, 1.4 kW
Lubricating system Forced lubrication by trochoidal pump
Cooling system Pressurized radiator, forced circulation with water pump
Fuel Diesel fuel No. 2-D [above
−
10 °C (14 °F)], Diesel fuel No. 1 [below
−
10 °C (14 °F]
Capacities
Fuel tank 24 L (6.3 U.S.gals., 5.3 Imp.gals.)
Engine crankcase
(with filter)
3.0 L (3.2 U.S.qts., 2.6 Imp.qts.)
Engine coolant 3.8 L (4.0 U.S.qts., 3.3 Imp.qts.)
Transmission case 11.5 L (3.04 U.S.gals., 2.53 Imp.gals.)
12.5 L (3.30 U.S.gals.,
2.75 Imp.gals.)
Front axle case 3.7 L (3.9 U.S.qts., 3.3 Imp.qts.) 4.5 L (4.8 U.S.qts., 4.0 Imp.qts.)
Tires
Front 6-12B 6-12
Rear 8-16 9.5-16
Dimensions
Overall length (with 3P) 2378 mm (93.6 in.) 2405 mm (94.7 in.)
Overall width (min. tread) 990 mm (39.0 in.) 1040 mm (40.9 in.)
Overall height
(with ROPS)
2246 mm (88.4 in.) 2268 mm (89.3 in.)
Overall height
(top of steering wheel)
1283 mm (50.5 in.) 1305 mm (51.4 in.)
Wheel base 1500 mm (59.0 in.)
Minimum ground
clearance
263 mm (10.4 in.) 285 mm (11.2 in.)
Tread
Front 830 mm (32.7 in.)
Rear
740 to 910 mm
(29.1 to 35.8 in.)
795 to 1015 mm (31.3 to 40.0 in.)
Weight (with ROPS) 658 kg (1451 lbs) 668 kg (1473 lbs) 678 kg (1495 lbs) 694 kg (1530 lbs)
Minimum turning
radius
4WD with brake 2.1 m (6.9 feet)
Bi-speed turn
without brake
– 2.1 m (6.9 feet)
Clutch Dry single plate
Travelling
system
Steering Integral type power steering
Transmission Gear shift, 6 forward and 2 reverse
HST with 2 speeds
range gear shift
Brake Wet disk type
Differential Bevel gears
Hydraulic
system
Hydraulic control system Position control
Pump capacity
3P : 16.6 L/min. (4.4 U.S.gals./min., 3.7 Imp.gals./min.)
Power steering : 9.8 L/min. (2.6 U.S.gals./min., 2.2 Imp.gals./min.)
Three point hitch SAE Category
I
Max. lift
force
At lift points 750 kg (1655 lbs)
24 in. behind lift
points
590 kg (1300 lbs)
PTO system
Rear
PTO shaft SAE 1-3/8, 6 splines
Revolution 1 speed (540 rpm at 2600 engine rpm)
Mid.
PTO shaft USA No. 5 (KUBOTA 10-tooth) involute spline
Revolution 1 speed (2500 rpm at 2578 engine rpm)
KiSC issued 11, 2006 A
Find manuals at https://best-manuals.com Find manuals at https://best-manuals.com