Delivery and assembly
43
Steering
The following applies to all instructions below:
Please note the following instructions and safety information:
»Coupling the machine«. Page 44.
»Coupling the lower link«, page 45.
»Coupling the PTO shaft«, page 47.
Checking the
steering
The steering is fitted and calibrated in the factory. Check the
adjustment of the steering with a hitched machine.
Drive along a straight line with the entire combination (tractor with
hitched machine). For example, a straight kerb.
Check if the machine follows the tractor in the same track.
If the machine is pulled at an offset angle behind the tractor, the
tracking must be checked and adjusted. This work must be carried out
by a dealer.
Checking the track
If the machine rolls at an offset angle to the tractor when driving a
straight line, the directional stability is set incorrectly. Proceed as
follows:
See chapter »Checking the track«, page 99.
Consult your dealer. Never carry out any work on the steering or
tracking yourself.
\
WARNING
Never carry out work on the steering
Contact your dealer if specifications differ. Never carry out any
work on the steering or track yourself.
This can result in traffic accidents and accidents causing serious
or fatal injuries.
Track arm
Steering arm
Track rod
Steering rod
