Road transport
64
Setting the lowest
transport height
Move the machine to the headland position using the tractor's
single-acting hydraulic control device.
Adjust the swath to the smallest width using the tractor‘s double-
acting hydraulic control device.
Hydro version
Raise the machine into the headland position using the tractor's
single-acting control device.
Adjust the swath to the smallest width using the tractor's double-
acting hydraulic control device.
Switch on the pilotbox and set the 3-way switch to B.
Lower the hydraulic transport chassis using the tractor's double-
acting hydraulic control device.
Switch the 3-way switch to the neutral position and switch off the
pilotbox.
Folding in the guard
bars
Before removing the tines, move all the protective devices around the
rotors from the transport to the work position, and lock them in place.
Fold in the guard bar as follows:
Lower the machine to the work position using the tractor's single-
acting hydraulic control device.
Shut off the engine, set the parking brake, remove the ignition key
and secure the tractor against rolling away.
Release the guard bar by pulling it out of the latch for the work
position.
Fold the guard bar through 180° and engage it in the latch for the
transport position.
Latch for work
position
Latch for transport
position
Guard bar
