Maintenance
99
Checking
the track
If the machine rolls at an offset angle to the tractor when driving a
straight line, the directional stability is set incorrectly. Proceed as
follows:
Shut off the engine, set the parking brake, remove the ignition key
and secure the tractor against rolling away.
Control length
of the front steering rod. L1 = approx. 2 019 mm (6.63 ft).
of the rear steering rod. L2 = approx. 2 612 mm (8.57 ft).
of the track rods: S = 1 015 mm (3.33 ft).
Check track A at the front and rear sides of the tires.
•
Front: A/Rear: A + 3 mm (0.12 in).
\
WARNING
Never carry out work on the steering
Contact your dealer if specifications differ. Never carry out any
work on the steering or tracking yourself. This can result in traffic
accidents and accidents causing serious or fatal injuries.
Track arm
Steering arm
Track rod
Steering rod
Control length
L1 = 2 019 mm (6.63 ft)
Only adjust rear
steering rod.
Control length
L2 = 2 612 mm (8.57 ft)
A
A + 3 mm (0.12 in)
S
S
Track rod
S = 1 015 mm (3.33 ft)
