Preparations on the field
50
Folding out the guard
bars
After the tines have been attached, all protective devices must be
moved from transport to work position. Fold out the guard bar as
follows:
Left guard bar
Remove the safety splint from the front support.
Pull the left guard bar with swath former forwards, against the
resistance of the pressure spring, and fold downwards by 90°.
Right guard bar
Remove the safety splint from the front support.
Pull the right guard bar forwards, against the resistance of the
pressure spring, and fold downwards by 90°.
Observe the instructions in chapter »Preparing for use«, section
»Working depth« on page 40.
No persons within the slewing range
There is an acute risk of injury within the slewing range from
machine parts which are slewing or folding. Otherwise, serious or
fatal injury may be caused as a result.
Pressure spring
Safety splint
Front transverse
carrier
