Road transport
44
Folding in the guard
bars
Before removing the tine supports, move all the protective devices
around the rotors from the work to the transport position, and lock
them in place. Fold in the guard bar as follows:
Lower the machine to the work position using the tractor's single-
acting hydraulic control device.
Switch off the tractor and secure it.
Pull the swath former out of the holder.
Fully insert the swath former.
Left guard bar
Pull the left guard bar with swath former forwards, against the
resistance of the pressure spring, and fold upwards to 90°.
Lock the guard bar in the vertical position.
Secure the guard bar on the front support using a safety splint.
Right guard bar
Pull the right guard bar forwards, against the resistance of the
pressure spring, and fold upwards by 90°.
Lock the guard bar in the vertical position.
Secure the guard bar on the front support using a safety splint.
No persons within the slewing range
There is an acute risk of injury within the slewing range from
machine parts which are slewing or folding. Otherwise, serious or
fatal injury may be caused as a result.
Pressure spring
Safety splint
Front transverse carrier
