Kubota RA1042T, Operator'S Manual

Page: 43 / 81

Road transport
43
General
The following worksteps are described in this section:
•
»Prior to road transport«
•
»Folding in the guard bars«
•
»Folding the machine into the transport position«
•
»Checking the machine«
•
»Road transport«
Prior to road
transport
When driving on public roads, the machine must be in the transport
position. To prepare the machine for road transport, carry out the
following steps:

»Moving the swath former to the transport position«

»Folding in the guard bars«

»Removing the tine supports«

»Placing the tine supports in the transport holder«

»Folding the machine into the transport position«

»Checking the machine«

Move the machine onto ground that is as flat as possible before
changing from work to transport position.
Moving the swath
former to the
transport position
For the transport position with the lowest transport width, pull the
swath former out of the holder, turn it 180° and push it fully back in and
secure it.
The swath former consists of a board and a holder.

In the work position, release the T-bolt from the swath former.

Completely pull the swath former out of the holder.

Turn the swath former 180° and push it back into the holder the
other way round.

Secure the swath former with the T-bolt.
Swath former holder