G-24
L3540, L4240, L5040, L5240, L5740, WSM
G
GENERAL
[3] CHECK POINTS OF EVERY 50 HOURS
Checking Wheel Mounting Screws and Nuts Tightening Torque
CAUTION
• Never operate tractor with a loose rim, wheel, or axle.
1. Check wheel screws and nuts regularly especially when new. If
there are loosened, tighten as follows.
W1030725
Checking Engine Start System
(GST/Manual Transmission Model)
CAUTION
• Do not allow anyone near the tractor while testing.
• If the tractor does not pass the test, do not operate the
tractor.
Q
Preparation before testing.
1. Place all control levers in the
“NEUTRAL”
position.
2. Set the parking brake and stop the engine.
Q
Test 1 : Switch for the shuttle shift lever.
1. Sit on operator’s seat.
2. Shift the shuttle shift lever to the forward or reverse position.
3. Depress the clutch pedal fully.
4. Disengage the PTO clutch control lever.
5. Turn the key to
“START”
position.
6. The engine must not crank.
Q
Test 2 : Switch for the PTO clutch control lever.
1. Sit on operator’s seat.
2. Engage the PTO clutch control lever.
3. Depress the clutch pedal fully.
4. Shift the shuttle shift lever to the neutral position.
5. Turn the key to
“START”
position.
6. The engine must not crank.
Q
If it cranks at the test 1 or 2, adjust or replace the related
safety switch.
W10312010
Tightening torque
Front wheel
mounting
nuts
L3540
L4240
137 N·m
14 kgf·m
100 lbf·ft
Front wheel
mounting
nuts
L5040
L5240
L5740
185 N·m
19 kgf·m
136 lbf·ft
Rear wheel mounting
screws and nuts
215 N·m
22 kgf·m
166 lbf·ft
(1) Front Wheel Mounting Nut
(2) Rear Wheel Mounting Screw and
Nut
(1) Shuttle Shift Lever
(2) Clutch Pedal
(3) PTO Clutch Control Lever
KiSC issued 04, 2010 A
Summary of Contents for L3540
