1-S45
L3540, L4240, L5040, L5240, L5740, WSM
ENGINE
Governor Springs and Speed Control Plate (Continued)
(When reassembling)
• Using the governor spring hooking special tool (1), Hook the
small spring (4) first and then the large governor spring (2) on the
speed control plate (6).
• Put the governor spring hooking special tool (1) from the injection
pump side to catch the large governor spring (2). Keep this
spring slightly extended and place the speed control plate (6) in
its specified position.
• Using the governor spring hooking special tool (1), hook the small
governor spring onto the fork lever (3).
NOTE
Q
• Be careful not to stretch the small governor spring too long
because otherwise it may get deformed permanently.
• Using the governor spring hooking special tool (1), hook the
large governor spring (2) onto the fork lever (3).
• Make sure both the governor springs (2), (4) are tight on the
fork lever (3).
• Apply and tighten up the two bolts and two nuts on the
speed control plate (6).
• Check that the speed control lever (5) positions low idle,
after assembling governor springs.
• Check that the speed control lever (5) returns to the high idle
position rather than the low idle position, after moving the
lever to the maximum speed position.
• Finally attach the injection pump cover in position.
W1152334
(1) Governor Spring Hooking Special
Tool
(2) Large Governor Spring
(3) Fork Lever
(4) Small Governor Spring
(5) Speed Control Lever
(6) Speed Control Plate
KiSC issued 04, 2010 A
Summary of Contents for L3540
