Kubota Impac 500, Owner'S Manual

Page: 9 / 28

INSTALLATION INSTRUCTIONS
(cont…)
BEFORE INSTALLING LIFT SYSTEM -
PARK THE
Polaris Ranger™
ON FLAT LEVEL GROUND
,
SET
PARK BRAKE AND CHOCK THE WHEELS
After the Polaris Ranger™ is securely parked, clear the
Polaris Ranger™ bed of any objects and ensure that it is
clean.
Before taking the next steps - lay out the following tools.
(See Figure 1)
INSTALLING LIFT SYSTEM
Your Polaris Ranger™ IMPAC 500™ System is shipped in
a box on a pallet. Using a crane, forklift or similar, place
the box/pallet on flat level ground, positioning it behind
and in line with the Polaris Ranger™ . This will make the
installation easier.(See Figure 2)
Figure 1
Remove the top of the box.
Remove the hardware package.
Figure 2
Tools needed for installation
Remove the hardware that is securing the Lift System to
the base of the box/pallet. (See Figure 3)
Figure 3
Page 7
1) Flat Head Screwdriver
2) Phillips Screwdriver
3) Utility Knife
4) Crescent Adjustable Wrench
5) 7/16 inch Open End Wrench
6) 1/2 inch Open End Wrench
7)
Ratchet
8)
Ratchet Extension
9)
10mm Socket
10)
7/16 inch Socket 11)
1/2" inch Socket
12)
T30 Torx Wrench
13)
17/64 inch Drill Bit
14)
5/16 inch Drill Bit
15)
Drill
9/16 inch Open End Wrench
9/16 " inch Socket
1 6 )
1 7 )