－１－
■
Switching HOT
／
COLD temperature setting
* Unused. It is only for cooling
Press to switch on/off powerful operation.
LED will turn on while powerful operation is activated.
Powerful operation will be cancelled in 2 hours from activation.
Press to select lighting settings from "ON", "AUTO", or "OFF".
LED for corresponding setting will indicate the setting. Both LEDs will turn on when it is set in "OFF".
Unused
LED will turn on, when condenser malfunction is detected.
Please check and clean the condenser, and then press the key after it is done.
Condenser is normal when the LED is not on.
Total amount for each counter from G1 to G10 could be viewed by pressing the key.
■
View Counter
Press "Counter" key to view counters for each grouping.
１．
Counter will indicate total amount at first. Press "Counter" key to show count by grouping.
show count by grouping.
２．
Next counter will be displayed by pressing the key again.
３．
Indicated counter will return to that of total after the final counter.
Example:
Ｇ
1 counter
Ｇ１ ３４５６７８
Temperature setting switch
* Unused. It is only for cooling
Press to select test mode
Press to stop vending
Unused
Modify settings and data
1．Press to perform diagnostics
2．Press continuously for more
than 2 seconds to clear data
1．Select mode function
2．Start／Stop test vend
Flashes in case of malfunction
1．Date，hour，and total sales
count will displayed during idling．
2．Failure type and number of
failures will be displayed in case
of malfunction occurrence
Press to select sales count mode
Press to select alternative sales
Press for price setting mode
Modify settings and data
Press to confirm
End key board operation
LED indicate the activated function
・Stop vend
・alternative sales
・column-selection
Part descriptions and function
TPK
Vending
Corporation
Co.,
Ltd.
