CAB INSTALLATION
6 of 29
Fig. 1.10 (right side view of ROPS)
STEP 1: (VEHICLE PREP cont
’
d.)
1.8
Peel up both the right and left sides of the rubber
mat. Using a utility knife, remove the (3) outer tabs on
both sides of the mat for a total of (6) tabs. See fig 1.8.
Re
-
install both sides of the mat in place.
1.9
Using an awl, feel for the (6) outer holes of the
rubber mat and punch holes thru the mat. Drill (6) holes
(3/8”
diameter) thru the rubber mat. See fig 1.9.
1.10
Remove the ROPS adjustment knob found on the
right side of the ROPS. Replace with metric hardware
provided. See fig. 1.10.
Hardware Used
Qty
M10 X 25 FHCS
1
Fig. 1.9 (rubber mat with holes)
Fig. 1.8 (underside of floor mat
-
left floorboard)
3/8”
holes
remove tabs
