CAB INSTALLATION
15 of 29
Fig. 17.1d (under seat filler, right fender)
Fig. 17.1c (underseat filler installation)
Fig. 17.1e (under seat filler, left fender)
STEP 17: (UNDERSEAT FILLER,
PREMIUM CAB)
For Premium Cab only.
If installing a standard cab, proceed to step 18 on the
next page.
17.1
Move and tip the seat forward. Figures 17.1a and
17.1c thru 17.1e show the underseat filler. Begin by
doing a dry fit to get a feel for where all areas fit best
(underseat filler edges highlighted in white for clarity).
Start by lining up straight edge
“
A
”
(in fig. 17.1a) with
the bottom of the removable rear panel. Apply the
corresponding Velcro where deemed necessary and to
match the Velcro on the vinyl filler. Do not cover up any
factory decals.
Note: make sure to cut Velcro between
the removable rear panel and rear legs. Also, slots are
for seat belts to pass through on non
-
TLB vehicles
only.
Fig. 17.1a (underseat filler)
rear
left
side
apply Velcro
here
Fig. 17.1b (Velcro installation
-
rear panel and legs)
do not
cover
decals
edge
“
A
”
seat belt slots
“
A
”